This 5

'ZDNET Recommends': What exactly does it mean?

ZDNET's recommendations are based on many hours of testing, research, and comparison shopping.

We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites.

And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing.

When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions.

This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay.

Neither ZDNET nor the author are compensated for these independent reviews.

Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.

ZDNET's editorial team writes on behalf of you, our reader.

Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services.

Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards.

If we have made an error or published misleading information, we will correct or clarify the article.

If you see inaccuracies in our content, please report the mistake via this form .

Klein Tools 80016 Circuit Breaker Finder
Follow ZDNET: Add us as a preferred source on Google.

Do you ever wonder which wall socket corresponds to which circuit breaker or circuit in your main electrical panel?

Do you ever wonder how much current a particular socket can handle?

I did.

I found a cool tool in the Klein 80016 Circuit Breaker Finder that helped me answer those questions.

It can help you, too.

Also: I tested DeWalt's electric snow blower over the weekend - now my gas model feels outdated
Here's my story.

It starts with a mystery, grows into a bafflement, and eventually results in something better than I could have possibly hoped for.

But that's the luck of the draw.

Going in, I had no idea.

Two part tester that helps map circuits to wall sockets.

This is the Fab Lab.

It's a narrow 8x14-foot room that contains my non-messy desktop fabrication gear.

I divide up my fabrication gear into messy (the CNC, resin 3D printers, cutters and saws, etc.) and non-messy (servers, 3D printers, the Glowforge, microscope, etc).

The messy stuff lives in my workshop, which I can also vent to the outside by opening the garage door.

The non-messy stuff lives in the Fab Lab, which does have a vent for the Glowforge but is otherwise nicely climate-controlled.

Both servers and 3D printers like climate control.

That narrow room, the Fab Lab, has six wall sockets.

I wanted to find out how much power was going into the room because it supports four servers, seven 3D printers, and a laser cutter.

I was concerned about running it all on one 15A circuit, which isn't enough juice for all that gear to run at once.

I planned to call my electrician to see if he could add some circuits, but first, I wanted to know what I had.

I tried the age-old trick of turning on and off breakers and yelling across the house to my wife, but the accuracy of that practice left something to be desired.

So I bought a tool.

I always love it when an actual need justifies buying a new tool.

I don't buy tools just to have them.

I wait until I need something.

When I actually have a legitimate need for something cool and different, that's a cause for celebration.

Hey, you get your joy your way.

I'll get it my way.

Don't even get me started on my love of charts and diagrams.

So, yeah, I bought the tool and made a diagram.

Enter the circuit breaker finder
The tool in question is the Klein Tools 80016 Circuit Breaker Finder .

It has two parts.

The first is something that looks like a socket tester.

It plugs into the wall socket and indicates if the circuit is good via some lights on the small device.

To find the right circuit in the electrical panel, you first plug the socket tester into a socket.

Then you go to the panel and slide the probe up and down all the breakers.

You then do a complete cycle of all the breakers, ignoring any sounds.

This allows the device to set a baseline.

After that, you move the device breaker-by-breaker until you hear a tone.

The breaker you're touching when you hear the tone is the breaker that corresponds with the socket.

Also: Why I no longer buy pre-built SSDs for my PC (and what I recommend instead)
I did this with all six of my sockets, fully expecting them all to correspond with a single 15-amp breaker somewhere in the panel.

What I found gave me the… figurative… shock of my life.

I discovered one more thing that turned the weird up another notch.

There's one socket on the left wall that powers my four servers and four 3D printers.

I traced it back to a circuit breaker in the panel labeled MB Lights for the master bathroom lights.

So, yeah, the circuit that handled all my servers and four printers is the same one that powers part of the bathroom.

Fortunately, the load coming from the bathroom (wow, that does not sound right!) is minimal.

It's only a few ceiling bulbs.

The fact is, without the Klein circuit finding gadget , I never would have known that I already had more than enough power going into the Fab Lab.

I would have assumed that I was working with the one 15-amp circuit that such a room normally is allocated.

I would have never allowed myself to run all my gear at the same time.

This bestselling DeWalt cordless power tool is nearly 50% off right now - and I use it regularly
How to turn on repair mode on your Android phone - and why it's critical to do so
It's time to admit your router's built-in firewall isn't enough - here's what is